Dejavoo QD4

  1. Install the Dejavoo QD4.

    1. The Dejavoo QD4 can only be installed on a countertop near the NailSoft AiO (it cannot be mounted to the back of the AiO).  Remove the payment terminal with attached cables and power adapter from the Dejavoo box and set them out on the counter.

    2. Connect the power adapter to the USB-A cable, then plug the power adapter into a nearby outlet.

    3. If the store has an existing ethernet cable available at this spot, then plug their ethernet cable into the RJ-45 port on the included adapter.

    4. On the back of the NailSoft AiO, remove the existing mounting plate from the back of the Monitor Base using a Philips screwdriver.

    5. Tuck the two existing RJ-45 and USB-C cables back into the base (they will not be used).

    6. Replace the mounting plate with the white Flat Plate that came in the box (the small hole should be placed at the bottom).

  2. Connect the Dejavoo QD4 to WiFi.

    1. Press and hold the power button on the left side of the QD4 to turn it on.

    2. Press Settings, then select WLAN.

    3. Select the store’s WiFi network, then enter the store’s WiFi Password (if this was not provided in your work order’s custom fields, then you will need to ask the Store Manager for this information).

    4. Press Connect to finish WiFi setup.

    5. Press the home button at the bottom of the screen (circle).

Return to the install instructions to continue with the setup.